, please spend more than £50Description
***** Sorry we are unable to send these items outside of the UK*****
The Maxx Sport ECU comes supplied with an adaptor ready to plug straight into your cars original engine loom, the advantage of using this ECU is that there is a built in MAP sensor and wideband lambda controller. One of the other advantages are being able to remove the MAF sensor and allowing ease of upgrades with simple adjustments of the ECU.
This plug and play kit includes: Maxx Sport ECU, Plug and Play loom, MAP sensor connection kit, 4.2LSU Wideband Sensor, USB cable and quick start guide.
Target engines of MaxxECU SPORT
-
All 1-12 cylinder engines (4-stroke)
-
Up to 6 cylinders fully sequentially
-
Up to 12 cylinders in wasted spark
MaxxECU SPORT inputs
-
Intake air temperature sensor (IAT)
-
Coolant temperature sensor (CLT)
-
Throttle position sensor (TPS)
-
Lambda (WBO) sensor. Uses a sensor directly connected to the ECU without any additional electronics. Supports Bosch LSU 4.2 and 4.9
-
2 trigger inputs. VR or digital. Automatic trigger level detection. The signals are processed by a completely separated processor for maximum performance and immunity against interference
-
2 extra temperature sensors. Can be used as switches or to control additional functions
-
6 extra 0-5V inputs. Can be used for additional sensors such as measurement oil/fuel pressure
-
2 digital inputs used for example for speed sensors (Hall) or switches
-
Built-in 400kPa MAP-sensor for up to 3bar/43PSI of boost
MaxxECU SPORT outputs
-
6 peak/hold injector outputs. 1-2 high or low impedance injectors per output. 8A per output
-
6 ignition outputs. 5V signal to drive ignition modules, CDI units or coils
-
7 outputs for extra features. Can be used to control virtually anything. Fuel pumps, idle control, boost solenoids, nitrous, shift lights, fans, warning lights, etc. GPO 1-5 (2A), GPO 8 (5A), GPO 9 (2A)
-
2 extra motor outputs (e.g E-Throttle). GPO 11,12 (2A)
MaxxECU SPORT technical
-
CAN bus for expansion modules, OEM vehicle CAN, OBDII
-
USB communication for tuning with MTune
-
Bluetooth for connecting to mobile devices with MDash
-
8MB memory for internal logging, up to 1000Hz
-
Supply voltage 8-22V
-
ARM Cortex-M3 120MHz main processor
-
Resolution on ignition: 0.1 degrees
-
Resolution on injectors: 0.001 ms
-
Updates the fuel and ignition calculations 2000 times per second
-
The fastest PC communication on the market
-
Weight: 590g
-
140x134x42mm (including mounting points, excluding connector)
-
Aluminium casing
